Teagle Bale Processors
Part #: Teagle-Bale
Chop and feed bales of silage, alongside barriers or into ring feeders, allowing greater intake of silage with less wastage.
Details
Teagle Bale Processors
Tomahawk 4040, 5050 and 5050XL
Chop and feed bales of silage, alongside barriers or into ring feeders, allowing greater intake of silage with less wastage
The Tomahawk Drum models are economical, simple and robust. There are no gearboxes, with the drive to the rotor being direct from the tractor, a hydraulic motor is used to rotate the drum. Due to their simplicity and strength, customers can expect a long service life from their Tomahawk.
- Comfortable livestock are more productive - Provides an even and absorbent bed of straw.
- Increase consumption and reduce waste of baled silage - Baled silage that is lightly shredded with a Tomahawk is more palatable and easily consumed.
- Operation
- Blow straw up to 35', discharge to one or both sides of the tractor. Alternative delivery chutes are available to suit your requirements.
- Discharge silage to the right hand side only into a ring feeder or along a feed barrier.
- The Tomahawk 4040, 5050 and 5050XLM Bale Processor models use blades to chop dry or wet material. With very wet material the chop length may be as low as 1.5", and dry material will be around 6" long.
- Easy control of output by adjusting the speed of the drum rotation.
Tomahawk 404M, 505M and 505XLM
Fast effective milling of straw and miscanthus to a very consistent chop length, as short as 3/8"
- Blow straw up to 30', discharge to one or both sides of the tractor. Alternative delivery chutes are available to suit your requirements.
- The Tomahawk 404M, 505M and 505XLM bale processors use blades or hammers to chop dry material small enough to pass through the holes in a screen. A range of screens are available with holes from 3/8" to 1-3/8" to obtain material of a consistent chop length.
- Easy control of output by adjusting the speed of drum rotation.
- Various drum extensions are available for ease of operation or to accommodate larger rectangular bales.
- The 404M/505M/505XLM range is suitable for dry material only, and will not cut silage as it will block the mill sieve.
| Model | 4040 | 404M | 5050 | 505M | 5050XL | 505XLM |
| Drum Diamater | 5' 2" | 5' 2" | 6' 0" | 6' 0" | 6' 0" | 6' 0" |
| Max Round Bale Diameter | 4' | 4' | 5' | 5' | 5' | 5' |
| Max Rectangular Bale Size | -- | -- | -- | -- | 4' x 4' | 4' x 4' |
| Width with Chutes Closed | 6' 5" | 6' 5" | 6' 5" | 6' 5" | 6' 5" | 6' 5" |
| Discharge Height | ||||||
| Lower Chute | 1' 4" | 1' 4" | 1' 4" | 1' 4" | 1' 4" | 1' 4" |
| Upper Chute | 3' 7" | 3' 7" | 3' 7" | 3' 7" | 3' 7" | 3' 7" |
| Silage Giraffe Chute | 5' 0" | -- | 5' 0" | -- | 5' 0" | -- |
| Straw Giraffe Chute | -- | 6' 0" | -- | 6' 0" | -- | 6' 0" |
| Operating Width | 8' 2" | 6' 9" | 8' 2" | 7' 0" | 8' 2" | 7' 5" |
| Overall Length | 7' 8" | 7' 8" | 7' 8" | 7' 8" | 12' 4" | 12' 4" |
| Weight | 1788 lbs | 1992 lbs | 1933 lbs | 2138 lbs | 2571 lbs | 2776 lbs |
| PTO Power Required | ||||||
| Straw | 60 hp | 80 hp | 60 hp | 80 hp | 100 hp | 100 hp |
| Silage | 80 hp | -- | 80 hp | -- | 100 hp | -- |
 |
|