Brillion Pulverizer
The Brillion Pulverizer has been synonymous with quality seedbed preparation for well over 100 years.
Product Code: BP

Right Size/Right Model

Brillion offers 10 different series of Pulverizers in sizes from 5’ up to 46’.  There are three-point models from 5’ up to 20’.  There are rigid transport pull-type models from 10’ to 20’.  There are folding pull-type units that start at 19’ and range up to 52’.  There are floating ring models for use in tandem with primary tillage tools.  There are floating wing models that utilize a patented floatation system for surface hugging ability that finishes the ultimate seedbed.  There you have it.  Many sizes…many models!

It’s About Higher Yield

All models in the Brillion Pulverizer line have a common denominator….HIGHER YIELD.  Just about any scenario where a Pulverizer is used can be traced to the expectation of better yield.  Producers know that higher yields start with a properly prepared seedbed and that a firm seedbed is critical to maintain a uniform planting depth.  The ideal seedbed should be firm with fine particles at the seed depth and should have a layer of loose mulch on the surface to retard evaporation and conserve moisture.  Many of the most valuable nutrients are locked in the clods and root crowns left in the field.  The Brillion Pulverizer crushes those clods and breaks down the root crowns to release these nutrients for use by the crop.  At the same time, air pockets are eliminated and moisture is drawn into the root zone through capillary action.  Good seed to soil contact creates more uniform germination, pollination and maturity…and that means increased yield and greater profits.

It’s About the Soil

The Brillion Pulverizer line is a genuine asset to the value of the soil.  The tillage practices followed by many producers today may have some short-comings when ultimate seedbeds are concerned. The addition of a Brillion Pulverizer can be the missing link in improving the soil from mediocre to a good growth environment with just a single pass.  Many of the benefits of the Pulverizer have been mentioned above.  However, the Pulverizer has even more to offer.  The ribs or ridges on the Pulverizer rolls are real workhorses on these machines.  The ribs anchor residue into the surface of the seedbed so it can’t be blown or washed into the road ditches, water ways, culverts etc.  The ribs form a distinct texture on the surface that allows the soil surface to breathe in the event of a crusting rain.  The soil will normally split and crack along the rib cuts to allow oxygen and water to enter the soil and to give small seeds a place to grow through.  Some users also utilize the Pulverizer (equipped with notched wheels) in a post-plant mode, further firming the seedbed for optimum germination.

It’s About Smooth

Yes, it is about smooth.  The Brillion Pulverizer will put a smooth, textured finish on the seedbed.  The smooth seedbed allows for closer to the surface harvest in a soybean field.  The smooth seedbed offers the alfalfa grower the ultimate opportunity for high-speed cutting and harvesting. The smooth seedbed benefits the specialty crop producers with better planting conditions and better harvesting.  The smooth seedbed has any small to medium sized stones pushed into the soil to lessen the occurrence of ingestion by a combine or forage harvester.

It’s About Profit

The bottom line for Brillion Pulverizers is better “Return on Investment”.  Better ROI translates into profit.  That is what it’s all about.  PROFIT! 

Features:

Endless Options and Sizes to Accommodate Any Operation

  • Gray Iron Wheels Covered by Standard 1-Year Warranty
  • Ductile Iron Wheels Covered by 5-Year Limited Warranty
  • Scraper Kits Available for Notched Wheel Types
  • Powder Coat Paint

WFP Series, Wing Float Pulverizer - 22' to 36' Models

  • Patented Wing Float Design
  • Working Width: 23'4" to 37'4"
  • Transport Heights Under 11'
  • Transport Width 14'
  • Telescoping Drawbar on 28' to 36' Models
  • 8" Pulverizer Axle Size
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron
    • 20" Optimizer® Ductile Iron

WFP Series, Wing Float Pulverizer - 38' to 46', 50' & 52' Models

  • Patented Wing Float Design
  • Working Width: 38' to 52'
  • Transport Heights Under 10'
  • Transport Width 17'5" - 38' to 46' Models
  • Telescoping Drawbar
  • 8" Pulverizer Axle Size
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron
    • 20" Optimizer Ductile Iron

X Series, Folding Pulverizer - 19' to 27' Models

  • Working Width: 19' to 27'
  • Transport Heights Under 7'10"
  • Transport Width 10'1"
  • 4 1/2" Pulverizer Axle Size
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron
    • 20" Optimizer Ductile Iron
    • 20" Crowfoot Gray Iron
    • 20" Notched Gray Iron

XL Series, Folding Pulverizer - 28' to 36' Models

  • Working Width: 28' to 36'
  • Transport Heights Under 8'
  • Transport Width 13'4"
  • Telescoping Drawbar
  • 4 1/2" Pulverizer Axle Size
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron
    • 20" Optimizer Ductile Iron
    • 20" Crowfoot Gray Iron
    • 20" Notched Gray Iron

XXL Series, Folding Pulverizer - 38' to 46' Models

  • Working Width: 38' to 46'
  • Transport Heights Under 8'9"
  • Transport Width 16'9"
  • Telescoping Drawbar
  • 4" Pulverizer Axle Size
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron
    • 20" Optimizer Ductile Iron
    • 20" Crowfoot Ductile Iron

PT Series, Rotating Frame Transport Models

  • Working Width: 10' to 20'
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron
    • 20" Notched Gray Iron
    • 20" Crowfoot Ductile Iron
    • 20" Optimizer Ductile Iron

P Series, Pull-Type/No Transport Models

  • Working Width: 5' to 16'
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron - 5' to 16' Models
    • 20" Notched Gray Iron - 10' to 16' Models
    • 16" Notched Gray Iron - 5' to 8' Models
    • 20" Crowfoot Ductile Iron - 10' to 16' Models
    • 16" Crowfoot Gray Iron - 5' to 8' Models

PP Series, Three-Point Hitch Models

  • Working Width: 5' to 20'
  • Cat. I Three-Point Hitch on 5' to 7' Models
  • Cat. I, II Three-Point Hitch on 8' to 20' Models
  • Pulverizer Wheel Styles:
    • 20" Notched Ductile Iron - 5' to 20' Models
    • 16" Notched Gray Iron - 5' to 8' Models
    • 16" Crowfoot Gray Iron - 5' to 8' Models
    • 20" Optimizer Ductile Iron - 10' to 20' Models

PFT Series, Floating Ring Models

  • Floating Ring Design Best Suited for Use with Companion Primary Tillage Tool
  • Cat. II, III Three-Point Hitch Models Available in Sizes from 6' to 18'
  • Pull-Type Models Available in Sizes from 10' to 18'
  • 20" Ductile Iron Rings with 14" Inside Diameter

SD Series, Double Gang Models

  • Double Roller Configuration - Same Foundation as on Brillion Sure Stand Seeders
  • 6', 8', 10' or 12' Three-Point Hitch Models Available
  • Cat. I Three-Point Hitch on 6' Model
  • Cat. I, II Three-Point Hitch on 8', 10', and 12' Models
  • Pull-Type Models Available in 8', 10' or 12' Sizes
  • Gray Iron Pulverizer Wheels with Larger Diameter Wheels on the Front Roller